Dakota Ultrasonics Mini-Max Bolt Tension Monitor with Temperature Sensor
Dakota Ultrasonics Mini-Max ultrasonic bolt tension monitor. Bolt lengths from 1/2" to 50 ft (15.24 m).
$4,050.00 USD
Prices in USD, shipping not included.
Shipping cost, lead time and availability are confirmed in your quotation.
Specifications
- Ultrasonic bolt tension monitor that measures the actual elongation produced by tightening a threaded fastener
- Supports periodic monitoring of bolts over their service life, with visual comparison of unloaded and loaded waveforms
- Measures fasteners of virtually any material from 1/2" up to 50 ft (15.24 m) in length
- Auto calibration for system zero and a built-in load calibration toolkit; temperature compensated
- Selectable pulser voltage (100, 150, 200 V) and variable transducer damping (50, 75, 100, 300, 600 and 1500 ohms) for 1-10 MHz transducers
- 110 dB gain range; hi/lo alarm limits for tolerances; Auto Set optimizes detection and display
- Display options: RF, rectified, large digits with limits bar
- Measurement mode: Pulse-Echo (P-E)
- Measurement range: 1 to 999.999 in (2540 cm), depending on material type and consistency
- Resolution: ±0.00001 in (0.0001 mm)
- Velocity: 0.0492 to 0.5510 in/µs (1250 to 13,995 m/s)
- Display: 1/8" VGA grayscale, 240 x 160 pixels, EL backlit
- Power: USB or power outlet, or batteries (alkaline 35 hrs, NiCad 10 hrs, NiMH 35 hrs); auto power off after 5 minutes idle
- Dimensions: 2.5 x 6.5 x 1.24" (63.5 x 165 x 31.5 mm); weight 13.5 oz with batteries
- In the box: Mini-Max unit, 3 AA batteries, 4 oz bottle of couplant, RS232 transfer cable (Lemo to DB9), USB converter cable to DB9, carrying case, transducer cable, PC utility software, operation manual and certification
Specifications are provided by the manufacturer and may change. Please confirm the exact model in your quote request.
