FLIR SV89 remote vibration and temperature monitoring sensor, 10 Hz to 10 kHz, Z axis

Specifications

• Wireless single-axis (Z) vibration and temperature sensor; requires a gateway (sold separately), to which it sends data over the local 2.4 GHz network
• Continuously analyzes vibration of rotating equipment to detect faults such as misalignment, bearing defects or gear damage, supporting predictive maintenance
• Sensors contain an accelerometer and a surface thermometer; acceleration in g, temperature in °F or °C, velocity derived internally in in/s or mm/s
• Measurements include GRMS, VRMS, peak, crest factor, kurtosis, skewness, standard deviation and FFT
• Web-based interface on the gateway for viewing vibration data, deploying sensors and managing integrations; edge computing of vibration analysis on the gateway
• Integrates with analysis tools through Modbus, MQTT and OPC UA
• Applications: manufacturing, utilities, petrochemical, production equipment, air compressors, pumps, and motors, fans, conveyors and chillers
• Sensor frequency range 10 Hz to 10 kHz; sensitivity range ±50 g; output data 10 kHz, Z axis, 12,800 raw data points
• Sensor Wi-Fi IEEE 802.11n, range up to 50 m (160 ft) line of sight during a session; TCP socket protocol
• Sensor mounting: 1/4"-28 UNF bolt or screw, or optional magnetic mount (sold separately)
• Sensor temperature range: contact temperature trend display -20 to 80°C (-4 to 176°F); operating -20 to 80°C (-4 to 149°F)
• Capture rate configurable from 1 minute to 1 day
• Sensor IP66; 1 m (3 ft) drop tested; operating altitude 2000 m (6562 ft); humidity 10 to 95% non-condensing
• Sensor battery: LS17500 3.6 V 3600 mAh replaceable lithium, minimum 2 years depending on sampling rate and environment
• Sensor dimensions 29 x 25 x 14 mm (1.14 x 0.98 x 0.55 in); certifications ETL/FCC/IC/CE/UKCA/RCM
• Sensor weight 187 g (6.6 oz)

Specifications are provided by the manufacturer and may change. Please confirm the exact model in your quote request.