Imada I-80 Torque Calibrator for Power Drivers and Wrenches, 78.60 N-cm / 7.860 N-m
Imada I-80 torque calibrator. Range 0.20 to 69.70 lbf-in (7.860 N-m) with smart adapters.
$1,790.00 USD
Prices in USD, shipping not included.
Shipping cost, lead time and availability are confirmed in your quotation.
Specifications
- Torque calibrator that measures the peak torque applied to a screw by non-impact electric and air drivers
- Under-tightened screws give insufficient clamp force and can loosen; over-tightening past the yield point permanently deforms the joint, so correct tightening torque matters
- Smart adapters simulate the screw joint and do not need to be backed off after each test
- Results can be downloaded through the USB port; compatible with Imada SW-1SV-USB software
- Measuring range: 0.20 to 69.70 lbf-in
- Programmable High/Low setpoints with audible beep for uniform tightening or GO/NO GO testing
- Peak, Real Time and Peak Down measuring modes (selectable); clockwise and counterclockwise measurement
- USB virtual COM port sends peak (1 data) or continuous data (12 or 180 data/second)
- Statistics: number of data, Max, Min, Avg
- Heavy-duty metal construction; runs on internal NiCad batteries or AC adapter; 3/8" drive for socket wrenches
- Accuracy: ±0.5% F.S. ±1 LSD
- Ranges: 0.20 to 66.97 lbf-in / 0.02 to 80.00 kgf-cm / 2.0 to 786.0 N-cm / 0.020 to 7.860 N-m
- Smart adapters: OW-20E (range 18 lbf-in, top screw 6-32, operational life 5000 hrs) and OW-60E (range 53 lbf-in, top screw 1/4-20, operational life 5000 hrs)
- In the box: torque calibrator, 2 x driver adapters, AC adapter/charger, hard carrying case
Specifications are provided by the manufacturer and may change. Please confirm the exact model in your quote request.
