Mark-10 AFCOMP Complete Options Package for the ESM303

Specifications

• Complete options package for the ESM303 motorized tension/compression test stand, with 14 functions, an interface cable and a USB cable
• FollowMe: crosshead movement responds to manual push or pull on the gauge shaft or load cell; greater force gives greater speed
• Travel indication on the control unit display with USB output; internal scale using Renishaw technology
• Computer control through ASCII communications; also responds to the legacy Chatillon TCD command set and Nexygen TCD software
• Programmable travel limits: stand stops at, or cycles between, upper and lower travel distances
• Overload protection set as a percentage of gauge full scale; adjustable analog voltage setting
• Auto return, and cycling/dwell time with up to 100,000 cycles and dwell times up to 10,000 seconds
• Independent up and down speeds; low speed extension down to 0.02 in/min (0.5 mm/min); high speed extension up to 45 in/min (1100 mm/min)
• Break detection (programmable percentage of peak force) and load holding
• Preload/sample touch with three modes: stop, stop and zero, zero without stopping
• Profiles: up to 50 sets of test parameters can be stored
• Several functions need a Series 7 or 5 gauge or indicator with load cell and interface cable 09-1214
• In the box: 14 functions, interface cable, USB cable

Specifications are provided by the manufacturer and may change. Please confirm the exact model in your quote request.