Megger DLRO2X Ducter Low Resistance Ohmmeter with data storage, 2 A
Megger DLRO2X Ducter hand-held low resistance ohmmeter. 2 A test current, 1 μΩ to 2000 Ω, CAT III 600 V / CAT IV 300 V.
$4,373.25 USD
Prices in USD, shipping not included.
Shipping cost, lead time and availability are confirmed in your quotation.
Specifications
- Hand-held low resistance ohmmeter for fast, repeatable measurements, including in electrically noisy locations
- Applications include aviation, wind turbines, rail, marine, oil and gas pipelines, automotive and EV, cable and component manufacturing, data centres, switchgear and robotics
- Active protection against accidental connection to live circuits up to 600 V without blowing a fuse
- Noise rejection mode with Confidence Meter™ refines readings until stable; warns when noise or a poor clip/probe connection is present
- Difference Meter compares repeat measurements with a reference value, shown as a needle movement; new reference set with one button
- Dedicated long test lead mode provides up to 1 A into 4 Ω; inductive mode tests inductive loads at 1 A
- Bidirectional mode compensates for standing EMF (forward and reverse results on the secondary display); unidirectional mode saves time and battery
- Three results can be viewed at once, suited to 3-phase systems
- Results saved manually or automatically into asset ID folders in internal memory, then copied to USB; rotary dial function selection
- Test current ranges: 2 A, 1 A, 100 mA, 10 mA, 1 mA; current output accuracy ±10% in normal and inductive modes
- Resistance range: 1 μΩ to 2000 Ω; basic accuracy ±1% ±2 digits (bidirectional) or ±1% ±10 digits (unidirectional)
- Data storage: 8 million total records, 256 asset IDs, 256 records per asset per day; USB for firmware updates only
- Protection IP54; safety rating CAT III 600 V / CAT IV 300 V to IEC 61010; EMC IEC61326-1, IEC61326-2-2
- Power: HR6 rechargeable NiMH batteries fitted, replaceable with AA alkaline; up to 500 x 2 A 3-second tests per full charge
- Charger adaptor: 100 to 240 V, 47 to 63 Hz input; 12 V DC 1.2 A output; interchangeable Australia, USA, Europe and UK plugs
- In the box: DLRO2X ohmmeter, compact CAT III 600 V / CAT IV 300 V Kelvin clip test leads
Specifications are provided by the manufacturer and may change. Please confirm the exact model in your quote request.
