Mitutoyo 542-192 LG100 Linear Gauge, 0.4″/10 mm, 0.4 µm

Specifications

• Linear gauge for in-line measurement and shop-floor measurement cells, with real-time measurement and data management
• Photoelectric encoder gives high precision across the full range and resistance to electrical interference
• IP67G rating for coolant, oil and dust resistance; oil-resistant rubber cap and cable sheath; sliding durability of more than 50 million cycles
• Reference point signal output; master setting value is retained after shutdown
• Up to eight compact EJ counters (sold separately) can be linked to connect up to 16 gauges; DIN-rail units connect without cables
• Data output through CC-Link via an EJ counter and interface unit; USB interface for computer connection
• Shock resistance: 1000 m/s2 (IEC 60068-2-27)
• Calculation functions between two gauges on one counter, including tolerance judgment and peak hold
• Applications: battery flatness, insertion depth check, base material warp detection, stage positioning, air knife gap and roll gap measurement
• Measuring range: 0.4" (10 mm)
• Resolution: 0.000005" (0.1 µm)
• Accuracy (20°C): 0.8 + L/50 µm, L = arbitrary measuring length (mm); small range 0.5 µm (arbitrary 20 µm range)
• Repeatability (2 σ, 20°C): 0.3 µm
• Measuring force: 1.4 N or less (contact point down), 1.3 N or less (horizontal), 1.2 N or less (up)
• Maximum response speed: 400 mm/s
• Minimum edge interval: 250 ns (4 MHz); output signal pitch: 0.4 µm
• Reference mark position (Phase-Z): 0.12" (3 mm) from contact point tip
• Operating conditions: 32 to 122°F (0 to 50°C), 20 to 80% RH, non-condensing
• Stem: Ø0.3" (Ø8 mm); dimensions: 5.1 x 2.4 x 0.6" (129.5 x 61.5 x 15.4 mm); weight approximately 0.57 lbs (260 g)
• In the box: linear gauge, wrench for contact point

Specifications are provided by the manufacturer and may change. Please confirm the exact model in your quote request.