
RKI GX-6100 Multi-Gas Detector, LEL/O2/H2S/CO/VOC, 0 to 40,000 ppb
RKI GX-6100 multi-gas detector. LEL, O2, H2S, CO and VOC (PID) up to 40,000 ppb.
$4,480.00 USD
Prices in USD, shipping not included.
Shipping cost, lead time and availability are confirmed in your quotation.
Specifications
- RKI GX-6100 handheld multi-gas detector, configured for LEL, O2, H2S, CO and VOC with a PID range up to 40,000 ppb
- Handheld multi-gas detector with internal sample pump, monitoring up to 6 gases at once
- Standard confined-space channels (combustibles, O2, CO, H2S) plus 2 smart sensor slots that accept PID, PPM, IR or super-toxic sensors
- Measures combustible gases in both ppm and % volume ranges in one instrument (thermal conductivity sensor for % volume)
- Operating modes: Normal, Barhole, Inert, Leak Check, Snap Log, Benzene Specific
- PID options: 10.6 eV (2 ranges), 10.0 eV and 11.7 eV lamps; dual PID sensors supported; PID library of over 600 VOCs
- Man-down alarm, panic alarm, LED flashlight, auto-rotating LCD with peak-bar display, Bluetooth sharing of emergency alerts
- Typical uses: confined space entry, hazmat response, arson investigation, remediation sites, perimeter and landfill monitoring, leak detection, winery tank entry
- Oxygen: 0 to 40.0% Vol., 0.1% Vol. increment, accuracy ±0.5% O2
- Carbon monoxide: 0 to 2,000 ppm, 1 ppm increment, accuracy ±5% of reading or ±5 ppm
- Hydrogen sulfide: 0 to 200 ppm, 0.5 ppm increment, accuracy ±5% of reading or ±2 ppm
- Combustibles (ceramic R sensor): 0 to 100% LEL, 1% LEL increment, accuracy ±5% of reading or ±2% LEL
- Alarms: adjustable low and high gas alarms; trouble alarms for low flow, sensor connection, low battery, circuit error, calibration failure; 95 dB audible alarm at 1 ft (0.30 m)
- Communication: Bluetooth, IrDA; 16 display languages
- Battery: interchangeable Li-ion (up to 28 hours, 6 hour recharge) or alkaline (8 hours, 3 AA cells) packs
- Case: IP-67 dust and water resistant (excluding sample hose and probe); operating range -4 to 122°F (-20 to 50°C), 0 to 95% RH non-condensing
- Approvals: intrinsically safe ATEX / IECEx / cCSAus (pending)
- Dimensions: 2.6 x 7.9 x 2.2 in (6.60 x 20.07 x 5.59 cm)
- PID (10.6 eV lamp, 600 VOCs): 0 to 40,000 ppb, 1 ppb increment below 5,000 ppb and 10 ppb above, alarms 5,000 / 10,000 / 10,000 ppb, accuracy ±10% of reading ±1 digit
Specifications are provided by the manufacturer and may change. Please confirm the exact model in your quote request.



