SHIMPO DT-3011N xenon stroboscope, 30 to 35,000 fpm, AC-powered

Specifications

• Xenon stroboscope for printing inspection, motion analysis, preventive maintenance and speed measurement of repetitive motion
• Adjusting flash rate makes moving equipment appear stopped or slowed; measures rotational (RPM) or reciprocating (strokes per minute) speed
• Suited to conditions where a handheld tachometer is impractical
• Aluminum construction; focused high-polish reflector avoids blind viewing areas
• External trigger for synchronization with equipment; synchronous output lets a master strobe drive connected strobes
• Light emission auto-off timer (1 to 120 minutes) conserves flash tube life
• Phase shift set in degrees or ms; stores up to five user configurations
• Integral mounting thread for tripod or permanent mounting; RoHS approved
• Flash range: 30 to 35,000 FPM; flash duration 20 µs; flashing accuracy ±0.05% of reading
• Resolution: 0.1 FPM (30 to 5000), 0.2 FPM (5001 to 8000), 0.5 FPM (8001 to 10,000), 1 FPM (10,001 to 35,000)
• Delayed emission: 0 to 359° in 1° steps or 0 to 999.99 ms in 0.01 ms steps (1000 to 1994.4 ms in 0.1 ms steps)
• External sync input: H level 2.5 to 12 V, L level 0 to 0.5 V, pulse width 50 µs or more, input impedance 10 kΩ or more; range 27 to 35,020 FPM
• Lamp: xenon, 15 W input, typically 1200 hours at 1500 FPM
• Illuminance: 1950 lux at 1500 FPM / 2000 lux at 6000 FPM at 8" (20 cm), 8" (203 mm) irradiation diameter
• Display: 6-digit, 7-segment red LED
• Power: 100 to 115 V AC ±10%, 50/60 Hz; sensor supply 12 V DC, 40 mA
• Operating conditions: 32 to 104°F (0 to 40°C), 35 to 85% RH (non-condensing)
• Dimensions: 4.72 x 8.23 x 8.62" (120 x 209 x 219 mm); weight 2.6 lbs (1.2 kg)
• In the box: stroboscope, external signal I/O connector, grip, instruction manual

Specifications are provided by the manufacturer and may change. Please confirm the exact model in your quote request.