DeFelsko ATM50C Manual Adhesion Tester, 50 mm C1583 Concrete Kit

Specifications

• Manual hydraulic pull-off adhesion tester kit for the tensile strength of concrete surfaces, concrete repairs and overlays
• Portable; no external power source required; can be used in any position
• Pull rate indicator for monitoring the rate of pull per international test methods
• Pressure is calculated automatically from dolly or plate size; no conversion charts needed
• Self-aligning dolly for smooth or uneven surfaces; single-use dollies and plates can be kept as a record
• Internal memory for maximum pull-off pressure, rate of pull, test duration and dolly size
• Four stand-off options; sealed USB port; PosiSoft software suite; IP65 enclosure
• Calibrated and certified to ±1% accuracy using a NIST traceable load cell
• Range: 0.4 to 2.585 MPa
• Accuracy: ±1% full scale
• Included dollies: Ø50 mm (qty 4), steel, thicker than 25 mm
• Cutting tool: 50 mm diamond grit hole saw with arbor; adhesive: ResinLab EP11HT, 2-part epoxy
• In the box: adhesion tester, 4 x C1583 steel dollies 50 mm, diamond grit cutting tool with arbor 50 mm, C1583 stand-off 50 mm, protective case

Specifications are provided by the manufacturer and may change. Please confirm the exact model in your quote request.