Mitutoyo 542-197 LG100 Linear Gauge, 2″/50 mm, 2 µm

Specifications

• Linear gauge for in-line measurement and shop-floor measurement cells, with real-time measurement and data management
• Photoelectric encoder gives high precision across the full range and resistance to electrical interference
• IP67G rating for coolant, oil and dust resistance; oil-resistant rubber cap and cable sheath
• Reference point signal output; master setting value is retained after shutdown
• Up to eight compact EJ counters (sold separately) can be linked to connect up to 16 gauges; DIN-rail units connect without cables
• Data output through CC-Link via an EJ counter and interface unit; USB interface for computer connection
• Shock resistance: 1000 m/s2 (IEC 60068-2-27)
• Calculation functions between two gauges on one counter, including tolerance judgment and peak hold
• Applications: battery flatness, insertion depth check, base material warp detection, stage positioning, air knife gap and roll gap measurement; used in automotive, defense, electronics, general manufacturing, plastics and rubber
• Measuring range: 2" (50 mm)
• Resolution: 0.00002" (0.5 µm)
• Accuracy (20°C): 1.5 + L/50 µm, L = arbitrary measuring length (mm); small range 0.5 µm (arbitrary 20 µm range)
• Repeatability (2 σ, 20°C): 0.3 µm
• Measuring force: 5.7 N or less (contact point down), 5.3 N or less (horizontal), 4.9 N or less (up)
• Maximum response speed: 1500 mm/s
• Minimum edge interval: 250 ns (4 MHz); output signal pitch: 2 µm
• Reference mark position (Phase-Z): 0.2" (5 mm) from contact point tip
• Operating conditions: 32 to 122°F (0 to 50°C), 20 to 80% RH, non-condensing
• Stem: Ø0.6" (Ø15 mm); dimensions: 12.4 x 2.4 x 0.8" (316 x 61.7 x 20.6 mm); weight approximately 0.88 lbs (400 g)
• In the box: linear gauge, wrench for contact point

Specifications are provided by the manufacturer and may change. Please confirm the exact model in your quote request.