Precision Digital PD6100-6H5 ProVu digital panel meter, SunBright LED display, 2 relays, 4 to 20 mA output

Specifications

• Digital panel meter for strain gauge and load cell signals, used for weight and force measurement
• Also suited to tank weighing and level applications
• Supplies 5 or 10 V DC sensor excitation at up to 350 mA; supports up to twelve 350 Ω load cells
• Dual-line 6-digit SunBright LED display, 0.60 x 0.46 in (15.24 x 11.68 mm), readable in direct sunlight
• Upper display can show process value, peak, valley, alternating max/min, alarm set points or Modbus input; lower display can show units, set points or user legends
• Capture or programmable tare, auto-zero, peak/valley hold and ratiometric operation (compensates up to ±5% excitation variation)
• Dual-scale display from a single input, 32-point linearization and selectable rounding (1, 2, 5, 10, 20, 50 or 100)
• Built-in shunt resistor for calibration check; automatic conversion between lbs, kg, ounce, gram, ton and tonne
• Three programmable function keys and an on-board digital input
• Two relays and isolated 4 to 20 mA output; Modbus RTU as standard
• Onboard USB with MeterView Pro programming software for configuration, monitoring and datalogging
• Input ranges: 0 to 15, 0 to 30, 0 to 150, 0 to 300 mV; ±15, ±25, ±150, ±250 mV
• Accuracy: ±0.03% of calibrated span ±1 count (24-bit A/D)
• Temperature drift: 0.002% of span/°C max from 0 to 65°C; 0.005% of span/°C max from -30 to 0°C
• Input impedance: bridge input greater than 10 MΩ; mV source 200 kΩ
• Input power: 85 to 265 V AC; front panel rated NEMA 4X, IP65

Specifications are provided by the manufacturer and may change. Please confirm the exact model in your quote request.